DTF PRINTER USA

Hydraulic Heat Press Limited Warranty

Hydraulic Heat Press Machines · Warranty Duration: Twelve (12) Months

Hydraulic Heat Press · Limited warranty policy
Important safety notice: read before operation. The Customer must read and understand the complete Hydraulic Heat Press User Manual before operating the equipment. Do not operate the machine until all safety instructions, hydraulic oil requirements, electrical specifications, operating procedures, and maintenance guidelines have been reviewed and understood.

Use the manual for your specific model. HP-1620H owners can read the HP-1620H User Manual online. For other models, contact DTF Printer USA if you need a copy.

Failure to follow the User Manual may result in equipment damage, personal injury, or unsafe operating conditions. Damage caused or materially contributed to by failure to follow the User Manual may be excluded from warranty coverage. Failure to read the manual alone does not automatically void coverage for unrelated manufacturing defects.

1. Scope and Eligible Equipment

This Limited Warranty ("Warranty") is provided by DTF PRINTER USA LLC, operating under the DTF Printer USA brand ("Company"), to the original purchaser ("Customer") of a new, qualifying Hydraulic Heat Press Machine purchased directly from DTF Printer USA or an expressly authorized seller.

This Warranty applies to the Hydraulic Heat Press Machine model and serial number identified on the original sales invoice, including eligible models such as:

  • HP-1620H – 16" x 20" Hydraulic Dual-Platen Heat Press (User Manual)
  • HP-1624H – 16" x 24" Hydraulic Dual-Platen Heat Press
  • HP-2432H – 24" x 32" Hydraulic Heat Press

Coverage applies only to the qualifying equipment and original components supplied with the machine.

Separately purchased accessories, consumables, and other equipment are not covered unless expressly stated otherwise in writing.

2. Warranty Period and Coverage Summary

DTF Printer USA provides a twelve (12) month limited warranty beginning on the documented delivery date of the covered equipment.

The Warranty covers original, non-consumable equipment components against defects in materials and workmanship arising under normal operating conditions and proper use.

This Limited Warranty includes:

  • Free remote technical support during the warranty period.
  • Free approved replacement parts for confirmed warranty-covered defects.
  • Free standard outbound shipping of approved warranty replacement parts within the contiguous United States.
  • Company-authorized on-site service when the technical team determines that such service is necessary to resolve a confirmed warranty-covered defect that cannot reasonably be resolved remotely.

On-site service is not automatically provided for every warranty claim and requires technical evaluation and Company authorization.

Coverage remains subject to the exclusions, maintenance requirements, and claim procedures described in this document. This Warranty does not guarantee uninterrupted operation or freedom from all mechanical or electrical failures.

Approved repairs or replacement components remain covered for the remainder of the original warranty period, or any longer period required by applicable law. Replacement of a component does not restart the original warranty period.

3. Components Covered Under Warranty

The following original equipment components are covered against qualifying manufacturing defects:

A. Electronic and Electrical Components

  • Main control boards and internal electronic systems
  • Digital temperature controllers and display screens
  • Electrical relays and internal control circuitry
  • Temperature sensors and associated wiring
  • Factory-installed electrical components
  • Control buttons, power switches, emergency stop switches, and operating switches where failure results from a manufacturing defect rather than normal wear, impact, or misuse

B. Hydraulic System Components

  • Hydraulic pump
  • Hydraulic motor
  • Hydraulic cylinder
  • Factory-installed hydraulic valves
  • Internal pressure-control components
  • Original hydraulic fittings and connections

C. Heating System Components

  • Original heating elements
  • Heating assemblies
  • Heating-related temperature sensors
  • Internal heating-control components

D. Structural and Mechanical Components

  • Machine structural frame
  • Upper and lower platens
  • Platen mounting assemblies
  • Essential mechanical press components
  • Original moving mechanisms necessary for normal operation

Coverage applies to manufacturing defects and failures under intended operating conditions. Physical damage, ordinary wear, improper operation, and failures caused by excluded conditions are not covered.

4. Components Excluded From Warranty

The following items are considered consumables, maintenance materials, or normal-wear components and are excluded from the twelve (12) month parts warranty for ordinary wear and routine replacement:

  • Hydraulic oil and hydraulic maintenance fluids
  • Silicone rubber pads and pressure pads
  • Teflon sheets and protective heat-resistant sheets
  • Platen covers and protective coverings
  • Cleaning and maintenance supplies
  • Optional attachments and separately purchased accessories
  • Cosmetic surfaces, finishes, and exterior coverings affected only by ordinary wear
  • Other components requiring routine replacement due to normal usage

Fuses and power cords are not covered for ordinary wear, accidental damage, improper connection, or external electrical damage. An original component shown to have been defective at delivery may still qualify for an applicable remedy.

Normal wear of buttons, switches, seals, and mechanical contact surfaces is excluded. However, a manufacturing defect in an otherwise covered original component remains eligible for evaluation.

An excluded wear item does not automatically invalidate warranty coverage for unrelated components.

5. Ready-to-Use Delivery and Initial Operation

DTF Printer USA Hydraulic Heat Press Machines are delivered fully assembled. No mechanical assembly or professional equipment installation is required under normal delivery conditions.

Important: mandatory User Manual review before operation. The Customer must read and understand the complete Hydraulic Heat Press User Manual before operating the machine for the first time. The machine must not be operated until the Customer has reviewed all operating instructions, safety warnings, hydraulic oil requirements, electrical specifications, and maintenance guidelines.

Use the manual for your specific model. HP-1620H owners can read the HP-1620H User Manual online. For other models, contact DTF Printer USA if you need a copy.

Before operating the machine, the Customer must:

  • Read the complete User Manual and understand the operating procedures and safety requirements.
  • Remove protective shipping materials and inspect the machine for visible damage.
  • Add the specified hydraulic oil to the appropriate level, following the machine-specific User Manual.
  • Connect the machine to a suitable electrical supply that meets the voltage, current, grounding, and connection requirements for the particular model.
  • Complete the recommended initial startup and operational safety checks described in the User Manual.

The Customer must use the hydraulic oil specified in the machine documentation. Models requiring AW-46 hydraulic oil must use that grade or another fluid expressly approved in writing by DTF Printer USA.

If the machine requires a plug, connector, or electrical work not included with the equipment, this work must be performed by appropriately qualified personnel.

DTF Printer USA provides remote initial-operation guidance at no additional charge for eligible equipment purchased directly from the Company. Free initial assistance does not include third-party electrical work, customer-site preparation, or optional on-site setup services.

Failure to follow the User Manual may result in equipment damage, personal injury, or unsafe operating conditions. Damage caused or materially contributed to by failure to follow the User Manual may be excluded from warranty coverage. Failure to read the manual alone does not automatically void warranty coverage for unrelated manufacturing defects.

6. Hydraulic System Requirements and Exclusions

The hydraulic system must be operated and maintained according to the model-specific User Manual (HP-1620H: HP-1620H User Manual).

Warranty coverage includes qualifying manufacturing defects in the original hydraulic pump, motor, cylinder, valves, and related factory-installed components.

The following damage is excluded when reasonably established to have been caused or materially contributed to by:

  • Incorrect, incompatible, or contaminated hydraulic oil
  • Operation with insufficient hydraulic oil
  • Failure to follow written hydraulic maintenance instructions
  • Unauthorized pressure adjustments or system modifications
  • Operating beyond manufacturer-specified hydraulic pressure limits
  • Improper handling or unauthorized hydraulic repairs
  • Continued operation after a known hydraulic malfunction where doing so causes additional damage

Routine hydraulic oil filling, maintenance, and replacement are Customer responsibilities.

A hydraulic leak or component failure caused by a manufacturing defect remains eligible for warranty coverage.

7. Electrical and Heating System Requirements

The Customer must ensure that the equipment is connected to the correct electrical supply specified for the particular machine.

Warranty coverage includes qualifying manufacturing defects affecting the heating elements, electronic control boards, temperature-control systems, and other eligible original electrical components.

Damage caused by incorrect voltage, improper wiring, inadequate grounding, incompatible electrical connections, liquid exposure, or unauthorized electrical modifications is excluded when the causal relationship is reasonably established.

The Customer must not operate the machine outside the published temperature, electrical, and operating specifications.

All electrical installation and safety-critical repairs must be performed by qualified personnel.

8. Customer Maintenance and Proper Operation

The Customer is responsible for routine maintenance and safe operation of the equipment. Recommended maintenance responsibilities include:

  • Maintaining the required hydraulic oil level
  • Inspecting visible hydraulic connections for leakage
  • Keeping heating surfaces clean
  • Inspecting power connections for visible damage
  • Checking for abnormal pressure, noise, movement, or temperature behavior
  • Following the maintenance procedures specified in the User Manual (HP-1620H: HP-1620H User Manual)

The Customer must discontinue operation when a condition could create a safety hazard or cause additional equipment damage.

Failure to perform required maintenance may exclude damage resulting from that failure. A missing maintenance record alone does not automatically invalidate coverage for an unrelated manufacturing defect.

9. Initial Delivery Inspection and Shipping Damage

The Customer should carefully inspect the shipping packaging and equipment upon delivery. If visible damage is identified:

  • Ask the freight driver to document the damage.
  • Clearly mark the Proof of Delivery (POD) as "DAMAGED" before signing if accepting a visibly damaged shipment.
  • Take photographs of the packaging, affected equipment, and delivery documentation.
  • Preserve packaging materials when reasonably practical.
  • Notify DTF Printer USA as soon as possible.

If damage is severe, the Customer should contact DTF Printer USA before accepting the shipment when reasonably possible.

Concealed damage discovered after delivery should be reported promptly with supporting photographs and documentation.

Failure to document damage at delivery may complicate or limit the available carrier recovery process, but does not automatically extinguish rights or remedies that cannot lawfully be restricted.

Shipping damage, shortages, and delivery-related claims are handled under the applicable Shipping & Delivery Policy, purchase agreement, carrier requirements, and mandatory legal obligations.

10. Warranty Claim Submission

To request warranty assistance, the Customer must contact DTF Printer USA through its official support channels. The Customer should provide:

  • Customer name and order number
  • Machine model and serial number
  • Original purchase and delivery information
  • A detailed description of the reported issue
  • Photographs or videos showing the malfunction, when reasonably available
  • Relevant operating or maintenance information needed for diagnosis

The Company may request additional documentation or arrange a remote troubleshooting session to evaluate the reported issue.

DTF Printer USA will acknowledge warranty inquiries and communicate the next diagnostic steps within a commercially reasonable time.

11. Remote Technical Support

DTF Printer USA provides remote technical support at no additional charge during the warranty period for covered equipment. Technical assistance may be provided through:

  • Email correspondence
  • Telephone support
  • Video calls
  • Troubleshooting instructions
  • Operating guidance and repair tutorials

Remote technical support is the primary warranty service method. The Company will make commercially reasonable efforts to diagnose reported problems and identify appropriate repair or replacement procedures.

Where safe and practical, DTF Printer USA may provide step-by-step instructions for installing approved warranty replacement components.

The Customer must not perform hazardous electrical, hydraulic, or safety-critical repairs without appropriate qualifications.

If a confirmed warranty-covered defect cannot reasonably be resolved through remote technical support, the Company's technical team will evaluate whether on-site service is necessary under Section 13.

12. Warranty Repairs, Replacement Parts, and Shipping

If a component failure is confirmed to be covered under this Limited Warranty, DTF Printer USA will repair or replace the eligible defective component or provide another lawful warranty remedy.

Approved warranty replacement parts will be provided at no charge to the Customer.

DTF Printer USA will cover standard outbound shipping costs for approved warranty replacement parts delivered within the contiguous United States. This shipping coverage applies to standard shipping methods selected by the Company.

Customer-requested expedited shipping, special delivery arrangements, or additional optional shipping services are not included and may involve additional charges, which will be disclosed before shipment.

Replacement part availability may affect fulfillment and repair scheduling. The Company will make commercially reasonable efforts to provide a timely remedy.

For destinations outside the contiguous United States, shipping availability and any permissible additional charges will be explained in advance.

The Company may request return of a defective component for inspection. When return is required for an approved warranty claim within the contiguous United States, DTF Printer USA will provide reasonable return instructions and a prepaid standard return shipping label.

Where a confirmed warranty-covered defect cannot reasonably be resolved through remote troubleshooting or guided component replacement, the Company's technical team will determine whether an authorized on-site repair is necessary under Section 13.

13. Remote Technical Support and On-Site Warranty Service

DTF Printer USA provides free remote technical support as the primary method of warranty service.

All reported equipment issues will first be evaluated through remote troubleshooting, which may include phone support, video calls, diagnostic instructions, and guided repairs.

If a confirmed warranty-covered defect cannot be resolved through remote technical support, DTF Printer USA's technical team will determine whether an on-site technician visit is necessary.

When the technical team determines that on-site service is necessary to resolve the confirmed warranty-covered defect, DTF Printer USA will authorize and cover the reasonable costs of technician labor, travel, and repairs directly related to that covered issue.

On-site service is not automatically provided upon Customer request and is subject to technical evaluation and Company authorization. On-site service is not included for:

  • Issues that can reasonably be resolved through remote technical support.
  • Problems or damage excluded from warranty coverage.
  • Routine maintenance, hydraulic oil replacement, or normal wear.
  • Customer-requested inspections, adjustments, or optional services.
  • Repairs required due to misuse, improper electrical connections, or failure to follow the User Manual.

Any charges for non-warranty services must be disclosed to and approved by the Customer before work begins.

This provision does not guarantee an on-site visit for every equipment malfunction. On-site warranty service is provided only when the Company's technical team determines that it is necessary for a confirmed warranty-covered defect.

The Company will make commercially reasonable efforts to arrange authorized service within a reasonable time, subject to technician availability, location, and the nature of the repair.

14. Unauthorized Repairs and Modifications

The Customer should contact DTF Printer USA technical support before making modifications or repairs to the machine's electrical, heating, hydraulic, or mechanical systems.

Repairs or modifications performed by unauthorized personnel do not automatically void the entire Warranty. However, damage reasonably established to have been caused or materially worsened by an unauthorized repair, modification, or installation is excluded for the affected component or failure.

Unrelated manufacturing defects remain eligible for evaluation.

15. General Warranty Exclusions

This Limited Warranty does not cover failures or damage caused by:

  • Misuse, abuse, negligence, or accidents
  • Improper electrical connections or incorrect voltage
  • Incorrect hydraulic oil or contaminated hydraulic fluid
  • Operation outside published equipment specifications
  • Improper storage or transportation
  • Excessive dust, moisture, heat, or unsuitable environmental conditions
  • Unauthorized modifications causing equipment damage
  • Failure to follow required maintenance and safety procedures
  • Physical impact, flooding, fire, or liquid exposure
  • Ordinary wear, cosmetic deterioration, or routine maintenance
  • Continued operation after a known malfunction that causes additional damage

Warranty exclusions must be reasonably related to the specific component failure under evaluation. The existence of excluded damage in one component does not automatically cancel warranty coverage for separate, unrelated covered components.

16. Product Returns and Refunds

Hydraulic Heat Press Machines are generally sold as non-returnable and non-refundable equipment under DTF Printer USA's applicable Return & Refund Policy, except where required by law or expressly agreed to in writing.

This Limited Warranty does not create a general right to return equipment for convenience, dissatisfaction, or ordinary wear. Warranty-covered defects will be addressed through the remedies provided in this document and any remedies required by applicable law.

Nothing in this section eliminates statutory rights relating to defective goods, breach of warranty, or qualifying delivery damage.

17. Limitation of Liability

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, DTF PRINTER USA SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES ARISING FROM EQUIPMENT FAILURE, MALFUNCTION, OR DOWNTIME, INCLUDING LOST PROFITS, LOST REVENUE, LOST PRODUCTION, MISSED BUSINESS OPPORTUNITIES, OR BUSINESS INTERRUPTION.

The Company remains responsible for approved warranty repairs and replacement parts, eligible standard shipping, free remote technical support, and necessary Company-authorized on-site warranty service expressly provided under this Warranty.

For an authorized on-site visit required under Section 13, the Company will cover the reasonable technician labor, travel, and repair costs directly related to the confirmed warranty-covered defect.

No limitation in this section applies to liability or remedies that cannot lawfully be excluded or restricted.

18. Warranty Decisions, Applicable Law, and Customer Rights

DTF Printer USA will communicate the outcome of warranty evaluations. If a claim is denied, the Customer may request an explanation of the relevant diagnostic findings and policy provisions and provide additional evidence for reconsideration.

This document describes the Company's voluntary written limited warranty.

Texas law is intended to govern this Warranty, subject to controlling federal law and any non-waivable legal protections. Nothing in this document eliminates statutory rights or remedies that cannot legally be waived. Any limitation or exclusion of implied warranties must comply with applicable law.

No mandatory arbitration agreement or waiver of lawful dispute rights is created by this Warranty.

19. Warranty Transferability and Policy Changes

This Limited Warranty applies to the original purchasing Customer and the covered equipment identified on the sales invoice.

Warranty transfer to another owner requires prior written approval from DTF Printer USA unless applicable law requires otherwise.

Subsequent changes to the Company's warranty policies apply prospectively and do not unilaterally reduce express warranty commitments provided to the Customer at the time of sale.

Contact DTF Printer USA

Customer service

+1 (337) 785-6864

Phone and chat: 24/7

Technical support / WhatsApp

+1 (346) 793-8407

Monday–Friday · 9:00 AM–5:00 PM Central Time

DTF PRINTER USA LLC · 12603 Executive Drive, Suite 814, Stafford, TX 77477 · info@dtfprinterusa.com · www.dtfprinterusa.com

DTF Printer USA · info@dtfprinterusa.com · Stafford, Texas