| Item | Details |
|---|---|
| Warranty provider | DTF PRINTER USA LLC, doing business as DTF Printer USA |
| Applicable products | New EmbroUSA Commercial Embroidery Machines |
| Limited warranty period | Twelve (12) Months |
| Version | 1.0 · Effective Date: November 17, 2026 |
1. Warranty Coverage and Eligibility
DTF PRINTER USA LLC, doing business as DTF Printer USA ("Company"), provides this Limited Warranty ("Warranty") to the original purchaser ("Customer") of a qualifying new EmbroUSA embroidery machine purchased directly from DTF Printer USA.
This Warranty applies to eligible single-head and multi-head commercial embroidery machines sold by the Company. The covered equipment must be identified by the original purchase invoice, order confirmation, or applicable sales agreement.
This Warranty covers verified defects in materials and workmanship occurring under normal and intended operating conditions during the applicable Warranty Period. Coverage applies to the original machine and its eligible factory-installed components.
This Warranty does not cover routine maintenance, ordinary wear and tear, consumables, or damage resulting from improper operation, inadequate maintenance, accidents, or other excluded conditions described in this policy.
2. Warranty Period
DTF Printer USA provides a twelve (12) month Limited Warranty beginning on the documented delivery date of the covered embroidery machine.
The Warranty Period applies to eligible electronic, electrical, mechanical, and structural components, subject to the limitations and exclusions stated herein.
Repairs or replacement parts provided under this Warranty do not restart or extend the original Warranty Period, except where required by applicable law or expressly agreed to in writing by the Company. Replacement components remain covered for the remainder of the original Warranty Period or any longer period required by applicable law.
3. Covered Electronic and Electrical Components
The following original machine components are covered against verified manufacturing defects during the Warranty Period:
- Main control boards and electronic circuit boards
- LCD touchscreen and control panel components
- Power supply units and internal electrical components
- Main servo motors and stepping motors
- X-axis and Y-axis drive motors
- Original motor drivers and control systems
- Factory-installed sensors and positioning systems
- Original electrical wiring and internal connections
- Factory-installed electronic control assemblies
Coverage applies only to failures caused by defects in materials or workmanship under normal operating conditions. Electrical failures resulting from incorrect voltage, improper grounding, power surges, lightning, unauthorized wiring modifications, or other external electrical conditions are excluded.
4. Covered Mechanical and Drive System Components
During the twelve (12) month Warranty Period, DTF Printer USA covers verified manufacturing defects in original mechanical and drive system components. Eligible components include:
- Bushings and bearings
- Cams and gears
- Pulleys and sprockets
- Drive shafts and drive cables
- Frame drive rails and guide assemblies
- Original machine drive mechanisms
- Factory-installed mechanical positioning assemblies
- Original machine frame and structural supports
Coverage applies to manufacturing defects and does not include deterioration or failure caused by ordinary wear, excessive operating stress, improper lubrication, lack of maintenance, or misuse.
Belts, springs, and other components subject to routine wear are excluded when replacement is required because of ordinary use or aging. However, verified defects in materials or workmanship present at delivery or arising during the Warranty Period under normal intended use remain eligible for technical evaluation, even when the affected component is ordinarily subject to wear.
The Company will determine whether a reported component failure qualifies for repair or replacement based on its technical assessment.
5. Consumables and Normal Wear-and-Tear Exclusions
Certain embroidery machine components are consumable or wear items that require routine replacement, adjustment, or maintenance. The following items are excluded from standard warranty coverage when replacement is necessary because of ordinary wear, consumption, or routine use:
- Embroidery needles
- Embroidery threads
- Bobbins and bobbin thread
- Bobbin cases
- Rotary hooks and hook assemblies
- Reciprocators
- Trimmer knives and cutting blades
- Presser feet
- Springs and tension-related wear components
- Needle bars subject to normal operational wear
- Belts and other routine wear components
- Embroidery hoops and magnetic hoops
- Cap frames and cap attachments
- Stabilizers and backing materials
- Lubricants, cleaning materials, and maintenance supplies
Normal wear, routine adjustment, and maintenance-related replacement are the Customer's responsibility.
Manufacturing Defect Exception
The identification of a component as a consumable or wear item does not automatically exclude a verified manufacturing defect. If a component is defective upon delivery or exhibits a verified defect in materials or workmanship during the Warranty Period, DTF Printer USA will evaluate the claim individually.
Coverage decisions will be based on the nature and cause of the reported failure, the condition of the component, and applicable warranty obligations.
6. Embroidery Performance and Operating Conditions
Embroidery results depend on proper machine operation, embroidery design preparation, suitable materials, and appropriate machine settings. Factors affecting embroidery quality include:
- Embroidery design digitizing
- Fabric type and thickness
- Needle size, type, and condition
- Thread quality and compatibility
- Thread tension settings
- Bobbin installation and adjustment
- Stabilizer selection
- Proper hooping and fabric tension
- Machine speed and embroidery settings
- Routine cleaning and lubrication
Thread breakage, needle breakage, fabric puckering, thread tension irregularities, design misalignment, and inconsistent stitching do not automatically indicate a covered manufacturing defect. These issues may result from embroidery design files, fabric characteristics, operator settings, or consumable condition.
However, if technical evaluation determines that an embroidery performance issue was caused by a covered hardware defect, the affected component remains eligible for warranty service. DTF Printer USA does not guarantee uninterrupted production or identical embroidery results across all designs, materials, and operating conditions.
7. Initial Installation and Mandatory Training
DTF Printer USA provides complimentary initial remote installation guidance and operator training for qualifying new embroidery machines purchased directly from the Company. Remote assistance may include:
- Initial machine setup guidance
- Control panel orientation
- Machine threading and bobbin installation
- Needle installation guidance
- Basic hooping and cap attachment procedures
- Loading and operating embroidery designs
- Basic machine adjustments
- Routine cleaning and lubrication instructions
- Safety and operating procedures
Initial on-site installation is not included as a standard complimentary service. Any additional on-site installation service must be separately approved and documented in writing.
Mandatory Operator Training
Customers are required to complete the initial operator training or orientation provided or arranged by DTF Printer USA before independently operating the equipment. The Customer is responsible for ensuring that machine operators understand the applicable operating, safety, cleaning, and maintenance instructions.
Failure to complete training does not automatically void the entire Warranty. However, damage directly caused or materially contributed to by improper operation, failure to follow provided instructions, or operating the equipment without required knowledge may be excluded following reasonable technical evaluation. Unrelated manufacturing defects remain eligible for coverage.
8. Customer Maintenance Responsibilities
The Customer is responsible for properly maintaining the equipment according to the applicable machine user manual and technical guidance supplied by DTF Printer USA. Required maintenance includes, where applicable:
- Regular machine cleaning
- Proper lubrication of designated mechanical components
- Inspection and replacement of worn needles
- Proper threading and bobbin installation
- Cleaning of the bobbin and trimming areas
- Inspection of thread tension components
- Maintaining proper hoop and cap frame positioning
- Inspecting machine movement for unusual resistance or interference
- Maintaining appropriate electrical connections
- Protecting equipment from excessive dust, moisture, and environmental exposure
Only suitable lubricants and maintenance procedures specified or approved for the machine should be used. Insufficient lubrication, excessive lubrication, contaminated lubricants, and improper maintenance techniques may cause mechanical failures.
Damage caused by failure to perform required maintenance is excluded from warranty coverage. Routine maintenance, cleaning, lubrication, adjustments, and consumable replacement are not considered warranty repairs.
9. Third-Party Parts, Accessories, and Materials
The use of third-party embroidery threads, needles, stabilizers, hoops, or other compatible accessories does not automatically void this Limited Warranty. However, DTF Printer USA is not responsible for damage caused by incompatible, defective, improperly installed, or improperly used third-party materials or accessories, such as:
- Damage caused by incompatible embroidery frames
- Needle collisions resulting from incorrect hoop installation
- Mechanical damage from unsuitable attachments
- Electrical damage caused by unauthorized modifications
- Machine damage caused by improper installation of replacement components
Unauthorized repairs or modifications may result in exclusion of damage caused or materially contributed to by those actions. The use of third-party materials or accessories will not eliminate coverage for unrelated manufacturing defects.
10. Warranty Technical Support
DTF Printer USA provides complimentary remote technical support for eligible warranty-related equipment issues during the Warranty Period. Technical support may include:
- Telephone assistance
- Email troubleshooting
- Video-based technical assistance
- Remote machine diagnostics
- Guidance for approved component replacement
- Technical instructions for restoring normal machine operation
Remote troubleshooting is the primary and initial method of warranty service. Before authorizing a repair or replacement, the Company may request photographs, videos, error messages, or other information reasonably necessary to diagnose the reported problem.
The Customer agrees to provide reasonable cooperation during the technical evaluation process. Remote support does not include unlimited general production training, embroidery digitizing services, design creation, or routine maintenance performed on behalf of the Customer.
11. Repair or Replacement of Defective Components
If DTF Printer USA determines that an eligible component has failed due to a covered defect in materials or workmanship during the Warranty Period, the Company will, at its discretion, repair or replace the defective component at no charge.
The Company may determine the appropriate repair or replacement method based on the nature of the failure, technical feasibility, and part availability. Replacement components may be new or functionally equivalent compatible parts, provided they meet the applicable operational requirements.
The Company may request inspection or return of the defective component before or after providing a replacement. Where a return is required, DTF Printer USA will provide applicable return instructions and authorization information. The Customer must not return components without receiving instructions from the Company.
Approved warranty replacement parts will not require an advance purchase payment. Any limitations on repair or replacement remedies apply only to the extent permitted by applicable law.
12. Warranty Replacement Parts and Shipping
For verified warranty claims, DTF Printer USA will provide eligible replacement parts at no charge. Standard shipping for approved warranty replacement parts to addresses within the contiguous forty-eight (48) United States will be provided at no additional cost to the Customer.
Expedited shipping, special delivery arrangements, and shipments outside the contiguous United States may require additional charges, subject to applicable law and any written agreement. If a defective component must be returned for inspection, the Company will communicate the applicable return procedure and shipping arrangements.
Replacement parts remain covered for the remainder of the original Warranty Period, unless a longer period is required by law.
13. On-Site Warranty Service
DTF Printer USA primarily provides warranty service through remote technical support and replacement-part assistance. On-site service and technician labor are not automatically included as standard warranty benefits.
If a serious covered hardware defect cannot reasonably be resolved through remote troubleshooting or authorized replacement-part procedures, the Company's technical team may determine that on-site warranty service is necessary.
On-site warranty service may be authorized only after technical evaluation and written approval by DTF Printer USA. When an on-site repair is expressly authorized by the Company as a covered warranty remedy, the Company will cover the approved on-site repair labor and technician travel expenses within the authorized scope.
The Customer may not independently arrange third-party technicians, repairs, or on-site services at the Company's expense without prior written authorization. Optional on-site assistance, routine maintenance visits, training visits, and non-warranty repair services may be subject to separately disclosed service fees. No on-site service is guaranteed without technical approval.
14. Warranty Exclusions
This Limited Warranty does not cover failures, damage, or service requirements caused by:
- Improper installation, misuse, abuse, negligence, or accidents.
- Failure to follow the user manual or operating instructions.
- Insufficient, excessive, or improper lubrication.
- Failure to perform required cleaning or preventive maintenance.
- Improper needle, thread, bobbin, or hoop installation resulting in damage.
- Incompatible accessories or attachments that cause equipment damage.
- Incorrect electrical supply, improper grounding, voltage fluctuations, power surges, or lightning.
- Fire, water damage, flooding, corrosion, excessive humidity, or other environmental conditions.
- Unauthorized modifications or repairs that cause or contribute to the reported failure.
- Operating equipment outside its stated specifications or intended use.
- Routine maintenance, normal wear, or consumable replacement.
- Physical impact, collision, foreign objects, vandalism, or accidental damage.
- Improper storage, transportation, or relocation after completed delivery.
- Damage caused by continued operation after a known malfunction or safety warning.
- Third-party software, embroidery design files, or digitizing errors unrelated to a covered hardware defect.
Cosmetic damage that does not affect normal machine operation, including minor scratches, surface marks, or discoloration arising from ordinary use, is excluded.
The Company will evaluate exclusions in relation to the cause of the claimed defect. An excluded event or condition does not automatically void warranty coverage for unrelated eligible manufacturing defects.
15. Warranty Claim Procedure
Customers requesting warranty assistance must contact DTF Printer USA within the applicable Warranty Period and provide sufficient information for the Company to evaluate the reported issue. Requested information may include:
- Original order number or purchase invoice
- Machine model
- Machine serial number
- Delivery date, if available
- Detailed description of the problem
- Photographs or videos showing the reported issue
- Relevant error messages or operating conditions
DTF Printer USA may request additional diagnostic information reasonably necessary to determine whether the issue is covered. The Customer must cooperate with reasonable troubleshooting and inspection procedures.
Customers should discontinue operation if a malfunction presents a safety risk or could result in additional equipment damage. Disassembly of electrical assemblies or performance of potentially hazardous repairs should not be attempted without appropriate qualified assistance and authorization.
Once the evaluation is complete, DTF Printer USA will communicate the applicable warranty decision and authorized service procedure.
16. Limitations of Liability
To the maximum extent permitted by applicable law, DTF Printer USA shall not be liable for special, indirect, incidental, consequential, or punitive damages arising from equipment malfunction, interruption, or use. Such damages may include:
- Loss of business revenue or profits
- Production downtime
- Delayed or canceled customer orders
- Loss of anticipated business opportunities
- Third-party production expenses
- Loss of production materials or garments
- Additional labor or outsourcing costs
This Warranty does not guarantee uninterrupted operation or the suitability of the equipment for every specific production requirement. The Company's warranty obligations are limited to the covered remedies stated in this policy, subject to applicable law.
Nothing in this section excludes or limits liabilities, statutory remedies, or other rights that cannot lawfully be excluded or limited. Some states do not permit certain limitations or exclusions of incidental or consequential damages. Where prohibited by applicable law, the relevant limitations will not apply.
17. Warranty Transferability
This Limited Warranty is provided to the original purchaser of the covered equipment. The Warranty is not automatically transferable upon resale, assignment, or transfer of ownership.
Any proposed warranty transfer requires prior written approval from DTF Printer USA, except where transfer restrictions are prohibited by applicable law. An approved transfer does not restart or extend the original Warranty Period unless expressly stated in writing.
18. Returns, Refunds, and Related Company Policies
Embroidery machine purchases are subject to the applicable DTF Printer USA Return & Refund Policy. Equipment purchases are generally final and are not eligible for routine returns or refunds, except where required by applicable law or expressly approved in writing by the Company.
This Limited Warranty does not eliminate available remedies for qualifying warranty defects or non-waivable statutory rights. Shipping-related damage and delivery claims are governed by the applicable DTF Printer USA Shipping & Delivery Policy.
Purchase terms, payment obligations, and agreed installation arrangements are governed by the applicable Equipment Sales Agreement and Terms of Service, to the extent consistent with this product-specific Warranty and applicable law.
No general provision in another Company policy automatically cancels or reduces an express warranty benefit specifically provided under this Limited Warranty.
19. Legal Rights and Warranty Interpretation
This Limited Warranty provides specific warranty rights. The Customer may also have other rights under applicable federal or state law.
The express Warranty described in this document is limited to the eligible equipment, covered components, duration, conditions, and remedies stated herein. To the extent permitted by applicable law, implied warranties may be limited in duration to the applicable express Warranty Period. Any such limitation does not apply where prohibited by law.
Nothing in this Warranty is intended to waive or restrict rights, protections, or remedies that cannot legally be waived. If any provision of this policy is determined to be invalid or unenforceable, the remaining provisions will continue to apply to the extent permitted by law.
Changes to this Warranty affecting an existing purchase require the agreement of the parties where legally necessary and may not retroactively eliminate accrued warranty rights.
Contact DTF Printer USA
DTF PRINTER USA LLC · 12603 Executive Drive, Suite 814, Stafford, TX 77477 · info@dtfprinterusa.com · www.dtfprinterusa.com