DTF Supplies Near You in Stafford, TX

DTF Printer USA ships DTF inks, transfer films, adhesive powder, and cleaning supplies to Stafford, TX and the entire Houston metro area from our Stafford, Texas warehouse. Orders ship the same day, so print shops across the Houston metro can restock fast without sourcing out of state.

We stock the full range of DTF consumables: OEKO-TEX certified DTF ink (White, Cyan, Magenta, Yellow, Black, plus the 5-color batch set), DTF transfer film (Premium Double Hot Peel, Ultra Premium Hot Peel, Double Matte Smart Peel, A3 cut sheets, and Glitter film), DTF adhesive powder (Fine and Premium 1 kg), strong cleaning solution, and moisturizing liquid for printhead care.

A DTF ink set is the full color system you need to print: Cyan, Magenta, Yellow, Black, and White. Our 1 LT Batch set includes one 1-liter bottle of each color, so a single set is 5 liters of ink total. White is the underbase layer that makes colors show up on dark garments, which is why it is included alongside CMYK. You can also buy any single color on its own to top up whichever one runs out first.

White ink is printed as the underbase layer beneath every design, so it gets used on almost every print no matter what colors are in the artwork. As a rule of thumb, for every bottle of a color ink you will use several bottles of white. We sell DTF white ink separately in 0.5-liter and 1-liter bottles with volume pricing, so Stafford shops can keep extra on the shelf and avoid stopping production when white runs low.

Yes. Our DTF inks are specifically formulated for Epson i3200 and i1600 printheads. The formulation is OEKO-TEX certified, gives consistent color accuracy, and resists clogging when used with proper printhead maintenance.

Hot Peel film is removed immediately after pressing while the film is still warm, a faster workflow for high-volume production. Smart Peel, also called Cold Peel, is removed after the transfer cools down, usually about 10 to 20 seconds, until the film is cool enough to touch. Cold peeling gives better results on fine details and a softer hand-feel. Both work with the same DTF printers and inks, and many Stafford shops keep one roll of each on hand for different jobs.

A 1-liter ink set typically prints hundreds of medium-sized transfers depending on coverage. A 24x328-foot film roll runs through hundreds of small-to-medium gang sheets. Most Stafford shops keep at least one backup roll of film, a full color ink set, and 2-3 kg of powder on hand to avoid downtime.

Yes. In addition to consumable supplies, DTF Printer USA stocks commercial DTF printers from $8,955 and heat presses from $795. View our DTF printer and heat press lineup for Stafford for production-grade equipment with US-based support.

Yes. Our DTF inks, films, and powders work with any standard DTF setup, not just machines bought from us. The inks are formulated for Epson i3200 and i1600 printheads, which are the heads used in most DTF printers on the market, so Stafford and Houston shops running other brands can order from us without changing their workflow.

Match the film width to your printer. 24 inch rolls suit most production printers and gang sheets, while 12 inch and 16.5 inch rolls fit smaller desktop units. For short runs and test prints, A3 cut sheets are easier to feed than a full roll. If you are unsure which width your printer takes, contact us before ordering.

Fine powder has a smaller grain, which suits detailed designs, thin lines, and lightweight or soft fabrics. Premium powder gives a stronger overall bond and is a good default for heavy production and thicker garments. Many shops keep both on hand and choose per job.

Keep ink, film, and powder out of direct sunlight and away from heat in a climate-controlled space, ideally between roughly 60 and 77 degrees F. Texas summer heat and humidity can affect powder and film if they sit in a hot storage room or vehicle, so store supplies indoors and reseal powder and film between uses to protect them from moisture.