Every consumable on this page leaves our Texas warehouse the same day you order it and heads south down Highway 288 to the coast, so a Freeport bench stays fed through port work, plant orders, and the beach-season rush. Ink, film, powder, and cleaner, buy a single liter or a full restock, all of it tuned for Epson i3200 and i1600 heads.
Held deep in stock and dispatched the same day to Freeport, Clute, Surfside Beach, and the rest of the Brazoria County coast, with our warehouse sitting north up Highway 288 in Stafford. Everything else we carry, films, powders, cut sheets, and printhead care, opens up further down the page.
One box refills a Freeport press end to end: a full liter apiece of White, Cyan, Magenta, Yellow, and Black. Five liters of OEKO-TEX certified ink, formulated to sit right on i3200 and i1600 heads.
Get the Set
Twenty-four inches wide and 328 feet long, this premium double hot peel roll is sized for the block orders that land on a Freeport shop when a crew or a beach weekend needs shirts. Clean lift, crisp edges, built to keep going.
Check Stock
Sold by the kilogram in fine and premium grades. Fine holds the thin lettering on visitor and tournament tees; premium drives a harder bond into crew shirts and gear that gets washed hard and worn daily.
View Options
One hundred milliliters of printhead cleaner that keeps nozzles open between jobs. Cheap insurance against a blocked head stalling a port contract or a Surfside souvenir run at the worst moment.
View OptionsBuy back only the color that ran out, or reset the whole rack in a single order. All five share one OEKO-TEX certified formula, written specifically for Epson i3200 and i1600 printheads.
DTF white ink lays down first as the underbase under every design, so the bottle drains at several times the rate of any color beside it. Stock it accordingly: several whites for each CMYK on the shelf. A Freeport press with no white left is a press that has stopped, whatever else is still full.
Tap a category to see what is held and ready. Films, powders, cut sheets, and printhead care, all of it cleared to leave Stafford on the same day your Freeport order lands.
A 24 inch by 328 ft roll you can lift warm or leave to cool, whichever the run calls for. The dependable middle option for the mixed workload a Freeport shop sees week to week.
Check Stock
The roll that comes back on Freeport reorders more than any other. A refined hot peel with a clean release on tight detail, stocked in 12, 16.5, and 24 inch widths.
View Sizes
A 24 inch by 328 ft cold peel roll that waits until the sheet has cooled. The pick when artwork drops to small type and the finish has to feel soft rather than plastic.
Shop Film
A 24 inch by 328 ft glitter roll for the shirts and totes that need a bit of shine, beach-season pieces especially. Loads, prints, and presses like any standard film.
Shop Film
A3 sheets, 100 per pack, for the jobs where a full roll is more than the order needs. An easy starting point for desktop setups and one-off Freeport runs.
Get Sheets
Our strongest-selling grade, sold by the kilogram, with the firmer grip that crew shirts, work bags, and heavy repeat-wash orders demand.
Stock UpOne kilogram of fine-grain powder for tight artwork and lighter fabrics. Melts evenly and leaves a finish that stays soft under the hand.
Check StockA concentrated 100 ml cleaner for the end-of-day shutdown. Flushes the head and stops nozzles setting up before the next shift starts.
View Options
A liter of moisturizing fluid that keeps the printhead from drying and blocking. Worth having in any Freeport shop where the printer sits idle between runs.
Check Availability
DTF powder is the layer that melts under the platen and welds your print into the fibers, so the grade you reach for settles both how the shirt feels and how many wash cycles the design survives. Freeport shops order fine or premium by the kilogram, dispatched the same day from Stafford down Highway 288.
The grade Freeport crews order most, gripping harder through long runs and heavier fabric.
A finer grain that carries small type, tight artwork, and lightweight garments.
DTF transfer film, listed by some suppliers as DTF paper, is the sheet your artwork prints onto before the press drives it into the garment. Choosing well means balancing how fast you need to peel, how fine the artwork runs, and what width your printer takes. The three options a Freeport floor actually chooses between are laid out below.
Marketed elsewhere as instant peel. Take it off warm or let it cool first, either works. The flexible choice when volume is the priority and orders repeat.
Cold peel, so it comes off after cooling. The safer bet whenever the design carries thin strokes or small lettering and needs to finish soft.
The one we point Freeport shops to first. A refined hot peel that releases cleanly and keeps edges sharp on detailed work, in 12, 16.5, and 24 inch widths.
I recently purchased DTF printing supplies. They went above and beyond to make sure I had the correct supplies for my printer, answered all my questions, and gave detailed instructions for my equipment. I would highly recommend them and will definitely be back.
Great customer service and a one stop shop for DTF supplies and DTF printers, with the best prices in town. Ask for Ihsan and he will sort you out.
Powder, ink, and film all in one place, at the best price and quality we have found.
Freeport print shops, marine and port contractors, and Brazoria County coast decorators buy here for one plain reason: the consumables are already on a Texas shelf, so a restock never turns into a week of dead time.
Order your ink, film, and powder ahead of the daily cutoff and the box is out of our Texas warehouse before the day ends, moving south on 288 while a distant distributor is still queueing your paperwork behind three other states.
OEKO-TEX certified, which means it is rated safe against skin once the transfer is pressed into the shirt. Expect saturated color, a white that actually covers on dark garments, and a formula written around Epson i3200 and i1600 heads.
Nothing here is order-to-stock. All five inks, the full film range from hot peel through smart peel, glitter and A3 sheets, both powder grades, and printhead care sit ready. Take one liter as a trial or clear a shelf for a big run, no minimum either way.
Our Stafford warehouse dispatches straight down Highway 288 toward the Brazoria County coast, so Freeport gets dependable delivery stacked on top of same-day shipping. Chasing a port contract deadline or a Surfside weekend order? Call us and we will work out the fastest way to get it there.
When the supplier is already inside Texas, the arithmetic on every job changes. No week surrendered to a carrier crossing three states, no shutting the doors to go hunting for a bottle of ink, no gamble on bargain consumables that come back as a refund request. Same-day dispatch, a Stafford warehouse, and a team on the phone who has actually run this equipment.
Freeport took its name from a trade term when the Freeport Sulphur Company laid the town out in 1912, and the place has been built around moving things ever since, to the point that the Brazos River itself was rerouted through a diversion channel at the end of the 1920s. Today a deepwater port, a working commercial fishing fleet, and the plants along the coast set the weekday rhythm, while Bryan Beach, nearby Surfside, and the San Bernard National Wildlife Refuge pull a different crowd entirely on weekends. Those two economies ask for two different kinds of printed apparel, and a shop here usually serves both. Our Stafford warehouse dispatches the same day and runs south on Highway 288 to reach the coast.
Between Port Freeport, the shrimp and commercial fishing boats, and the plants ringing the coast, the weekday order book runs to crew shirts, contractor apparel, and high-visibility branding. This is clothing that gets worn every shift and laundered hard, so premium powder and OEKO-TEX ink earn their place.
Bryan Beach, Surfside just up the coast, fishing tournaments, and birding traffic through the San Bernard refuge lift demand for souvenir tees, tournament shirts, and small-batch merch. These runs are short and often last-minute, which is exactly why no minimums matters: one liter or one roll, no pallet commitment.
Freeport sits at the end of the 288 corridor and runs straight into Clute, Lake Jackson, and Oyster Creek. Whether the job comes off a port contract or a Surfside weekend, same-day dispatch from Stafford is what keeps a promised turnaround honest.
DTF Printer USA supplies inks, films, powders, and printhead care to Freeport and the coastal edge of Brazoria County. From the Historic District and Port Freeport out to Bryan Beach, Surfside Beach, Oyster Creek, Jones Creek, Clute, and Lake Jackson, a Freeport print shop, apparel label, or decorator gets US fulfillment without waiting on an overseas order.
Same-day dispatch and dependable delivery across Freeport and the coastal communities around it. Orders also go out nationwide from the same Stafford shelf.
Working notes for a Freeport bench: choosing consumables for two very different customers, keeping stock usable this close to the water, and ordering around a calendar that will not wait for a slow supplier.
A Freeport shop is really serving two customers who want opposite things. Port, fleet, and plant orders arrive as blocks of crew shirts and contractor apparel that will be worn every shift and washed to death, so they want premium powder for grip and a hot peel film that lets you move through hundreds of pieces without slowing down. The beach and tournament side is the mirror image: shorter runs, lighter garments, thin lettering and dates that have to sit soft against the skin, which points at fine powder and a matte smart peel. Trying to serve both from one all-purpose setup is where quality complaints start. Keeping both grades of powder and two film types on the shelf costs very little and means neither call gets turned away.
The problem in Freeport is not just moisture in the air, it is where the consumables physically sit. A powder sack left open on a bench near an open bay door takes in salt-laden air off the water all day, and by the second week the grain no longer flows evenly through the shaker. The fix is workflow rather than climate control: decant a few days worth of powder into a sealed working tub, keep the main bag closed in the conditioned part of the building, and label every roll and bag with the date it arrived so stock rotates oldest first instead of drifting to the back of a shelf. Cap ink between pours, keep bottles out of direct sun, and shake white before each run. None of this takes more than a minute a day, and it is the difference between consumables that last their full shelf life and stock you end up throwing out.
Most of what fills a Freeport order book lands on a fixed date. A tournament weekend, a plant turnaround, the opening stretch of beach season, a port contract with a start day already agreed. None of those move because a supplier three states away needs another four days. That is the real argument for buying inside Texas: an order placed before our daily cutoff leaves the Stafford warehouse the same afternoon and heads down 288 toward the coast, which turns restocking from a week-long gamble into something you can plan around. The shops that never get caught out do one more thing on top of that: they hold a spare film roll, a full five-color ink set, and a couple of kilos of each powder grade as a floor, and reorder when they touch it rather than when they run out.
The questions Freeport and Brazoria County coast decorators ask us most before placing a DTF supply order.
