Epson SureColor G9000: The 64-Inch DTF Printer
Epson SureColor G9000What a 64-Inch DTF Printer Changes
Epson announced the SureColor G9000 in January 2026, with availability starting summer 2026 through authorized Epson resellers. In the US, it carries the model designation SC-G9070. It's a 64-inch (1626mm) roll-to-roll DTFilm printer, meaning it prints direct-to-film transfers at a width more than double the 24-inch machines most DTF shops run today.
That width is the headline, but it's not the whole story. The G9000 also brings PrecisionCore Micro TFP printhead technology, a built-in front heater, 1.6L UltraChrome DF ink pouches, a default resolution of 1200x600 dpi, and automated daily maintenance (a fabric wiper for the printhead plus automated suction-cap cleaning) built to keep the machine running with less operator babysitting.
For most shops, though, the real question isn't "what does this printer do." It's "does my shop need this printer." A 64-inch roll-to-roll machine is built for volume most operators aren't running yet, and buying more machine than your order flow supports just ties up floor space and capital. Here's what actually changes at 64 inches, and how to tell if it's your next move or a machine to watch from a distance.
What the Epson SureColor G9000 Actually Is
Strip away the model number and the G9000 is Epson's answer to production-floor DTF printing. The specs that matter for shop owners:
64-Inch (1626mm) Roll Width
Enough to nest far more designs per pass than a 24-inch printer, or to run oversized transfers for banners, large-format apparel graphics, or multi-up production runs.
PrecisionCore Micro TFP Printhead
Epson's industrial printhead line, built for sustained high-volume output rather than intermittent small-batch printing.
Built-In Front Heater
Helps stabilize the film and ink as it feeds through, which matters more at higher speeds and wider webs.
1.6L UltraChrome DF Ink Pouches
Large-format ink supply designed to reduce how often an operator has to stop and swap ink during a long run.
1200x600 dpi + Automated Maintenance
Default resolution of 1200x600 dpi with automated daily maintenance routines (printhead wiping and suction-cap cleaning) aimed at keeping uptime high on a machine that's meant to run continuously.
What Changes When You Go From 24 Inches to 64 Inches
Width isn't just "more space." It changes how a shop plans production.
Throughput Per Pass
A 24-inch DTF printer, like the 24-inch DTF printer with four Epson i3200 printheads, runs roughly 1,000 to 1,200 inches per hour in a typical commercial configuration. A 64-inch machine covers far more surface area in that same hour simply because each pass lays down more than double the width. For a shop nesting dozens of small designs (think tags, sleeves, or repeated small logos), that width difference compounds fast.
Fewer Changeovers, More Planning Up Front
Wider format means more designs nested per sheet, which can mean fewer print runs for the same order volume. But it also means an operator has to plan layouts more carefully to actually use that width, rather than leaving film unused on a partially filled roll.
Automation as a Production Requirement
The built-in maintenance routines on the G9000 aren't a nice-to-have at this scale. On any DTF printer, printhead clogs get managed with frequent nozzle checks (roughly every 30 minutes), keeping capping solution in place so ink doesn't dry between runs, and wiping the head down at the end of the day. A machine feeding film across 64 inches for ten-plus hours a day needs that discipline built into the hardware, because a manual-only maintenance routine doesn't scale the same way it does on a smaller unit.
Floor Space and Power Planning
A production-floor printer at this width needs a longer run of physical space for infeed and outfeed, plus dedicated electrical planning. Whatever printer you run, the printer itself typically plugs into a standard 110V US outlet, while the companion dryer or curing unit is the piece that usually needs 220V on a 30-amp circuit. A wider printer doesn't change those base requirements, but it does mean laying out the whole line (printer, heater, dryer, press) takes more real floor space.
Who This Machine Is Actually For
Be honest about your order volume before you get excited about width. The SureColor G9000 targets shops running at genuinely high, sustained production, think contract print operations, multi-shift facilities, or businesses fulfilling large wholesale and franchise orders where a 24-inch printer would mean running around the clock just to keep up.
For most growing shops, that's not where the bottleneck is yet. Here is the honest match between shop type and machine size:
Epson SureColor G9000 (64-Inch)
Contract print operations, multi-shift facilities, and businesses fulfilling large wholesale or franchise orders where a 24-inch printer means running around the clock. Watch for availability through Epson's authorized reseller network from summer 2026.
24-Inch DTF Printer (Most Growing Shops)
For shops printing dozens to a few hundred transfers a day, the 24-inch DTF printer with four Epson i3200 printheads remains the practical workhorse, with configurations available in 2-head, 4-head, and 5-head setups depending on how much daily volume you actually need to cover.
16.5-Inch All-in-One with Powder Shaker
If you're just starting out or running a side operation, a compact option like the 16.5-inch all-in-one DTF printer with powder shaker covers small-batch work without the overhead of a production-scale line.
Browse the full lineup of DTF printers or the combined DTF printers and dryers options to compare configurations side by side before deciding.
Match the machine to the volume, not the spec sheet.
Compare DTF Printer USA's full lineup with 12-month limited warranty and US-stocked replacement parts.
What Doesn't Change No Matter the Width
Regardless of whether a shop runs 16.5 inches or 64 inches, the fundamentals of print quality stay the same. When a transfer isn't adhering properly, the troubleshooting order is: check the heat press first, then check whether powder coverage was sufficient, then check oven or dryer curing temperature, and only then look at ink or the machine itself.
A wider, more automated printer reduces some manual maintenance burden, but it doesn't remove the need for basic operator discipline: nozzle checks, proper capping between runs, and correct press and dryer settings still decide whether a transfer holds up after the first wash.
The Bottom Line
The Epson SureColor G9000 is a genuine step up in what's possible for high-volume roll-to-roll DTF production, not a replacement for the 24-inch machines that already run most of the industry.
If your shop is scaling past what a 24-inch line can keep up with, it's worth watching as availability opens up through Epson's authorized reseller network this summer. If you're not there yet, the smarter move is matching your current printer to your current volume, not your future one.
Not sure which configuration fits your production numbers right now? A professional DTF printer setup service can help you get whichever machine you choose running correctly from day one.
Frequently Asked Questions
What is the Epson SureColor G9000 used for?
The Epson SureColor G9000 is a 64-inch (1626mm) roll-to-roll DTFilm printer built for high-volume, production-scale direct-to-film transfer printing, aimed at shops running sustained daily output rather than small-batch orders. It uses PrecisionCore Micro TFP printhead technology with 1.6L UltraChrome DF ink pouches at 1200x600 dpi default resolution, designed for contract print operations, multi-shift facilities, and businesses fulfilling large wholesale or franchise orders.
When is the Epson SureColor G9000 available?
Epson announced the SureColor G9000 in January 2026, with availability expected from summer 2026 through authorized Epson resellers. The US model is designated SC-G9070. Shops planning to move to this format should watch for reseller announcements as availability opens up.
Is a 64-inch DTF printer better than a 24-inch machine?
Not automatically. A 64-inch printer covers more surface area per pass and suits very high sustained production volume, but a 24-inch machine, like DTF Printer USA's 24-inch DTF printer with four Epson i3200 printheads, remains the practical choice for most growing shops printing dozens to a few hundred transfers a day. The right size depends on your actual daily order volume, not the biggest spec sheet. For side operations or small-batch work, DTF Printer USA's 16.5-inch all-in-one printer with powder shaker is a more cost-appropriate starting point.
Does a wider DTF printer need extra warranty coverage on the print head?
No printer, wide or narrow, typically includes the print head in its standard limited warranty, since print heads are the most expensive component to replace. That holds true across DTF printer sizes. Regular maintenance (nozzle checks every 30 minutes during production, capping solution between runs, and end-of-day head wiping) is the primary defense against clogs, regardless of machine width.
What still matters most for DTF print quality no matter the printer size?
Heat press settings, adequate powder coverage, and correct oven or dryer curing temperature. When a transfer fails to adhere, checking the press first, then powder, then temperature (around 115°C on average for the powder cure), catches most issues before you need to look at the ink or the machine itself. This troubleshooting order applies to any DTF setup, whether it's a 16.5-inch all-in-one or a 64-inch production printer.
Buy the Right Size for Today's Volume
Compare DTF Printer USA's full range of DTF printers, from the 16.5-inch all-in-one to commercial 24-inch configurations, with 12-month limited warranty and setup service available. Match the machine to what your shop actually prints today.
Shop DTF Printers Talk to Our Team